Featured Private-Label Noise Cancelling Models (Catalog Tier 1)
Direct factory solutions ready for brand customization, acoustic curve tuning, and global compliance deployment.
China Heavy Bass ODM Wireless Over-Ear Headset with Mic & Custom Branding
View Product Details
ODM Customizable Passive Deep Bass Noise Cancelling Headphones with Mic
View Product Details
OEM Wireless 5.4 Voice And Volume Control Earbuds Pricelist & Quotes
View Product Details
ODM Wireless 5.4 Bluetooth Earbuds with Voice Control - Trusted Factory Direct
View Product Details
OEM Stereo ANC Kids Headphones with Long Battery & Custom Branding
View Product Details
Custom OEM Bluetooth 5.4 Cycling Helmet Headphones with Mic Control
View Product Details
ODM JM20 OWS Bluetooth 5.4 Earbuds with UV Sterilization & 30H Playback
View Product Details
OEM ANC Headset with Mic & Deep Bass Solution for Ultimate Acoustic Comfort
View Product DetailsTechnical Whitepaper: Engineering Next-Gen ODM ANC & Bluetooth Audio
In the highly competitive wireless audio hardware sector, achieving market differentiation requires a rigorous alignment between active noise reduction DSP algorithms, RF circuit design, dynamic driver acoustic cavity tuning, and industrial manufacturing tolerances.
Hybrid Active Noise Cancellation (ANC) Topologies
Modern noise cancelling Bluetooth headsets utilize a dual-microphone architecture incorporating both Feedforward (FF) and Feedback (FB) configurations. Feedforward microphones placed on the exterior housing detect incoming ambient acoustic waves prior to reaching the eardrum. Feedback microphones situated inside the ear-cup monitor the residual audio signal.
- FF+FB Hybrid Attenuation: Broad-spectrum noise cancellation achieving 35dB to 48dB reduction.
- Frequency Bandwidth: Effective low-frequency suppression from 20Hz up to 3kHz (targeting engines, AC HVAC, ambient rumble).
- Adaptive Noise Suppression: DSP real-time gain adjustment matching environmental SPL changes.
Bluetooth 5.4 & Ultra-Low Latency Chipsets
Our ODM headsets integrate high-performance SoC platforms from industry leaders (Qualcomm QCC308x/QCC518x, Airoha AB156x, Bestechnic BES2600/2700, and Realtek RTL8773). These chipsets enable dual-mode Bluetooth (Classic + LE Audio) with ultra-efficient power management.
- LC3 & High-Res Codecs: Native support for LDAC (990kbps 24-bit/96kHz), AAC, SBC, and LC3.
- Latency Reduction: Sub-35ms ultra-low latency algorithms for synchronized gaming and streaming.
- Auracast™ Broadcast Audio: Multi-stream sharing across unlimited public and private receivers.
Acoustic Cavity & Diaphragm Engineering
Acoustic performance is defined by electroacoustic driver dynamics and chamber resonance volume. Shenzhen Sonun employs precision 40mm and 45mm custom composite dynamic drivers featuring titanium-coated PET, bio-cellulose, or diamond-like carbon (DLC) membranes.
- THD Optimization: Total Harmonic Distortion maintained < 0.5% at 1kHz 94dB SPL.
- Bass Response: Tuned acoustic bass ports delivering sub-bass extension down to 15Hz.
- Speech ENC Clarity: Multi-mic AI deep neural network (DNN) environmental noise cancellation for calls.
Shenzhen Supply Chain Dominance & B2B Pricelist Architecture
Operating directly from Longhua District, Shenzhen—the undisputed epicenter of global consumer electronics manufacturing—Sonun provides complete cost transparency and rapid tooling deployment for volume OEM/ODM importers.
The Shenzhen Supply Chain Advantage
Sourcing ODM Bluetooth headsets directly from our Shenzhen facility eliminates intermediate trading markups while granting direct access to cutting-edge component suppliers. Our localized ecosystem ensures rapid prototyping and manufacturing resilience:
- Component Synergy: Integrated supply chain within a 20km radius for Bluetooth ICs, Knowles MEMS mics, high-density Lipo batteries, and precision CNC molds.
- Prototyping Speed: 3D-printed functional acoustic models within 48 hours; T1 plastic injection samples within 18-22 days.
- Cost Efficiency: Strategic bulk component purchasing yields a 15-25% Bill-of-Materials (BOM) advantage over non-clustered factories.
- Automated SMT & Testing: In-house Surface Mount Technology (SMT) lines combined with automated Audio Precision (APx525) acoustic testing.
BOM Cost Driver Allocation Breakdown
For strategic procurement directors, understanding the internal cost structure of an ODM Active Noise Cancelling headset is essential for contract negotiation and target margin engineering:
| Headset ODM/OEM Category | Core Hardware & ANC Specifications | MOQ Tier | Est. FOB Shenzhen Price (USD) | Target Retail / B2B Segment |
|---|---|---|---|---|
| Entry-Level Passive Noise Isolating | Bluetooth 5.4 (JL/Realtek), 40mm Mylar Driver, 300mAh Battery (20H Playback), Soft Protein Pads | 1,000 units | $6.50 - $9.80 | Promotional, Corporate Gifting, Retail Entry |
| Mid-Tier Single Feedforward ANC | Bluetooth 5.4, Single FF ANC (-25dB to -28dB), 40mm Titanium Driver, 500mAh Battery (35H Playback) | 1,000 units | $12.50 - $16.80 | Mass Retail, E-Commerce Private Label, WFH Office |
| High-End Hybrid ANC Executive | Qualcomm/Airoha Hybrid ANC (-38dB to -45dB), LDAC/aptX Adaptive, 45mm DLC Driver, 800mAh (60H Playback) | 500 units | $24.50 - $36.00 | Premium Audio Brands, Travel/Aviation, Hi-Fi Market |
| OWS Open-Ear Wearable Audio | Bluetooth 5.4, 16.2mm Dynamic Driver, Directional Sound Cavity, UV Sterilization Case, 30H Total Playback | 1,000 units | $14.20 - $19.50 | Sports, Cycling, Fitness, Outdoor Safety Channels |
| Kids Safe ANC & Volume Limit | Bluetooth 5.4, Active ANC + Hardware 85dB/94dB Volume Limiter, Food-Grade Hypoallergenic Materials | 1,000 units | $10.80 - $14.50 | K-12 Education, Kids Retail, Airport Travel Accessories |
* Note: Prices are indicative FOB Shenzhen guidelines based on standard customization parameters. Custom tooling (NRE), specialized color matching (Pantone), or proprietary app development will receive formal customized quotations upon technical brief submission.
Enterprise OEM & ODM Customization Architecture
Sonun audio provides end-to-end original design manufacturing capabilities to adapt base acoustic platforms into distinct, brand-aligned products for worldwide markets.
Industrial Design & Tooling (NRE)
We transform initial ID sketches or 3D CAD files into production-ready injection molds. Our tooling department handles complete plastic, silicon, and metal headband stamping design.
- Precision CNC aluminum mold fabrication.
- Custom ear-cup swivel mechanisms & folding hinges.
- Co-molded silicone headbands and soft-touch buttons.
CMF & Brand Aesthetics
Elevate brand positioning with custom Colors, Materials, and Finishes (CMF). We match exact Pantone color codes and execute durable cosmetic treatments:
- Laser etching, multi-color silk screening, and metallic electroplating.
- Matte UV coating, anti-fingerprint rubber oil spray.
- Premium memory foam, protein leather, breathable mesh, and cooling gel ear-pads.
Software, APP & Firmware Calibration
Differentiate user interaction via customized firmware configuration and proprietary mobile software application integrations:
- Custom BLE Pairing Name & Bluetooth Device MAC ID ranges.
- Localized voice prompts in 12+ international languages.
- Dedicated iOS & Android APP with custom EQ presets, touch remap, and OTA updates.
Localization Support & Global Compliance Assurance
Exporting consumer audio products into North American, European, and Asia-Pacific markets demands full regulatory compliance, battery safety standard adherence, and rigorous quality inspection protocols.
International Regulatory Certifications
Sonun supports enterprise clients by delivering full compliance documentation and pre-tested samples designed to clear regional import regulations seamlessly:
- European Union (EU): Full CE EMC, RED (Radio Equipment Directive), RoHS 2.0 (Hazardous Substances), REACH SVHC chemical safety, and WEEE recycling compliance.
- North America (US & Canada): FCC Part 15B / 15C certification, ISED / IC Canada registration, California Proposition 65 heavy metal compliance.
- Asia-Pacific & LatAm: TELEC/MIC (Japan), KC (South Korea), RCM (Australia), Anatel (Brazil), NCC (Taiwan), and Bluetooth SIG BQB qualification.
Quality Control & Reliability Testing Standards
Our quality assurance protocol follows strict AQL 0.65 (Major) / 1.5 (Minor) standards. Every batch of ODM headsets undergoes multi-stage stress testing before dispatch:
- Acoustic Integrity: 100% Audio Precision sweep testing for frequency curve accuracy and phase consistency.
- Mechanical Fatigue: 10,000-cycle headband flex stress tests, ear-cup swivel durability, and cable tension pull tests.
- Environmental Shock: Salt spray corrosion testing (48h), thermal shock (-20°C to +60°C operating cycles), and IPX4–IPX7 water/sweat ingress testing.
- Battery Logistics: UN38.3, MSDS, 1.2m drop test reports, and IEC 62133 safety standards for seamless air and sea freight.
Target Market Applications & 2025–2030 Technology Forecast
Understanding user intent and application environments drives sound engineering. We tailor our ODM acoustic platforms to match specific real-world usage scenarios.
Enterprise Office & Hybrid WFH
Optimized for Unified Communications (UC). Features dedicated voice-isolation ENC microphones, boom-mic attachments, instant mute toggles, and seamless multi-device Bluetooth Multipoint pairing (connecting PC and phone simultaneously).
Aviation Travel & Commuter Transit
High-depth Hybrid ANC (-40dB to -45dB) targeted at engine rumbles and subway track screech. Features ultra-soft pressure-relieving memory foam earpads, fold-flat travel structures, and extended 60+ hour battery runtime.
Sports Safety & Open-Ear Wearables
Leveraging Open Wearable Stereo (OWS) and air-conduction acoustic technology. Delivers high-energy bass while leaving the ear canal open to maintain situational awareness during outdoor cycling, running, and urban sports.
Future Trends: AI-Noise Cancellation & Eco Sourcing (2025–2030)
The global wireless headphone market is undergoing rapid evolution driven by smart computing and sustainability directives. Next-generation ODM models will integrate Context-Aware AI Scene Switching—automatically adjusting ANC filters based on ambient noise characterization. Furthermore, Sonun is leading green manufacturing initiatives by introducing Post-Consumer Recycled (PCR) plastics into headset housings and transitioning 100% of giftbox packaging to FSC-certified plastic-free biodegradable paper pulp.
Specialized Audio Series (Catalog Tier 2)
Explore kids volume-limited headsets, open-ear translation earbuds, and custom sports audio solutions for specialized market verticals.
China Custom Logo Kids Wired Headsets Factory with Microphone & Noise Reduction
View Product Details
China Hybrid ANC Wireless Over-Ear Headphones ODM Custom Logo Solutions
View Product Details
OEM Hybrid ANC Wireless Over-Ear Headphone ODM Supplier & Exporter
View Product Details
Custom OEM Stereo ANC Kids Headphones with Safe Volume Control & Branding
View Product Details
ODM Custom Logo Kids Wired Headsets with Microphone for Bulk Orders
View Product Details
Custom AI Language Translator Open-ear Bluetooth Earbuds with APP Control
View Product Details
ODM Colorful Ultra-Long Standby Children Bluetooth Headphone OEM
View Product Details
China 15hrs Playtime Wireless Sports Earbuds with Mic - Custom OEM/ODM
View Product DetailsFrequently Asked Questions (B2B Procurement & Engineering)
Essential guidance for brand managers, supply chain directors, and audio importers partnering with Shenzhen Sonun Technology Co., Ltd.
What is the distinction between your OEM and ODM noise cancelling headset services?
ODM (Original Design Manufacturing) is a comprehensive collaborative engineering service where Sonun develops an audio headset from concept to mass production based on your detailed product requirement brief (PRD). This includes custom industrial design (ID), mechanical layout (MD), customized tooling molds (NRE), custom acoustic cavity engineering, Bluetooth chipset selection (Qualcomm/Bestechnic/Airoha), custom ANC DSP algorithm tuning, and dedicated mobile APP development.
What is the standard Minimum Order Quantity (MOQ) and sample lead time?
Sample Timelines: Pre-production OEM samples with logo and custom color matching take approximately 7 to 10 working days. Functional ODM 3D-printed acoustic engineering samples can be delivered within 5 working days, while first-article plastic samples (T1 Molds) take 20 to 25 calendar days.
How does Sonun guarantee Active Noise Cancellation (ANC) curve consistency in mass production?
We calibrate each feedforward and feedback microphone gain parameter during assembly. Microphones are pre-paired in matching tolerance sets (±1dB sensitivity match), ensuring the mass-produced ANC attenuation curve matches the approved golden sample within a tight ±1.5dB margin across 20Hz to 3kHz.
Can Sonun assist with regulatory certification for specific destination countries?
Depending on your target destination, we coordinate testing with accredited third-party laboratories (SGS, TUV, Intertek) to obtain CE RED, FCC ID, IC Canada, TELEC/MIC (Japan), KC (Korea), Anatel (Brazil), and Bluetooth SIG BQB certifications under your brand or company name.
What are the key cost components included in an ODM Pricelist quote?
- Unit FOB Shenzhen Price: Covers raw materials (BOM), mainboard SMT, assembly, in-line testing, standard packaging, and inspection.
- NRE Tooling Fee: Charges for custom plastic injection molds and metal stamping dies (tooling ownership belongs to the buyer upon contract fulfillment).
- App & Firmware Development Fee: Applied only if requiring custom iOS/Android apps or proprietary DSP feature development.
- Compliance Certification Costs: Quoted based on third-party laboratory fees for targeted international markets.
How are IP rights and proprietary design designs protected during ODM projects?
For client-funded ODM projects where the buyer pays dedicated NRE tooling fees, all industrial designs, 3D CAD geometries, plastic molds, and custom software code remain the exclusive intellectual property of the client. Sonun will never resell or supply client-owned custom molds to third-party buyers.
What warranty terms and RMA defect replacement policies are provided?
We operate under a standard Acceptable Quality Level threshold of AQL 0.65 Major / 1.5 Minor. To cover potential shipping damages or field returns, we provide 0.5% to 1% FOC (Free of Charge) spare units or key spare parts (ear-pads, charging cables, mainboards) shipped alongside mass production batches. In the event of functional defect rates exceeding agreed SLA thresholds, Sonun provides immediate credit notes or replacement units in subsequent shipments.
How do I initiate a formal RFQ or factory audit with Shenzhen Sonun Technology Co., Ltd.?
Our acoustic engineering team will review your requirement brief within 24 hours and issue a preliminary feasibility report, BOM cost estimate, and project timeline. We also welcome client representatives and third-party auditing firms (SGS, Bureau Veritas) to inspect our Longhua, Shenzhen factory facility prior to contract signing.